About Icon

About & Pics

About Icon

Description

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces! Layer tracks to build up an entire song, play virtual instruments, add drum patterns, edit audio and MIDI with unlimited undo/redo, mix, add real-time effects, automate and much more!

Note that this is a TRIAL version of the full paid version and as such has some limitations!

Check out our new tutorial videos: https://www.youtube.com/watch?v=2BePLCxWnDI&list=PLD3ojanF28mZ60SQyMI7LlgD3DO_iRqYW

The following optional in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Vocal Tune with two-voice harmonizer
• Soundfont packs

Features:
• Multitrack audio recording/playback
• MIDI sequencing
• Drum pattern editor
• Low latency with a USB audio interface (*)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our iOS version
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!

(*) Depending on your hardware's capabilities

Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher

If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!

Twitter: https://twitter.com/extreamsd
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start

To prevent your device's mic from picking up what the speaker is playing back, we recommend using either a USB audio interface or a headset.

Google Play Store Category:

Primary: Applications

Secondary: Music & Audio

Google Play

Privacy Policy

Total Ratings

17K
5
11K
4
1.7K
3
1.4K
2
570
1
2.9K

Screenshots

Audio Evolution Mobile Studio TRIAL screenshot 1Audio Evolution Mobile Studio TRIAL screenshot 2Audio Evolution Mobile Studio TRIAL screenshot 3Audio Evolution Mobile Studio TRIAL screenshot 4Audio Evolution Mobile Studio TRIAL screenshot 5Audio Evolution Mobile Studio TRIAL screenshot 6Audio Evolution Mobile Studio TRIAL screenshot 7Audio Evolution Mobile Studio TRIAL screenshot 8Audio Evolution Mobile Studio TRIAL screenshot 9Audio Evolution Mobile Studio TRIAL screenshot 10Audio Evolution Mobile Studio TRIAL screenshot 11Audio Evolution Mobile Studio TRIAL screenshot 12Audio Evolution Mobile Studio TRIAL screenshot 13Audio Evolution Mobile Studio TRIAL screenshot 14Audio Evolution Mobile Studio TRIAL screenshot 15Audio Evolution Mobile Studio TRIAL screenshot 16Audio Evolution Mobile Studio TRIAL screenshot 17Audio Evolution Mobile Studio TRIAL screenshot 18Audio Evolution Mobile Studio TRIAL screenshot 19Audio Evolution Mobile Studio TRIAL screenshot 20Audio Evolution Mobile Studio TRIAL screenshot 21Audio Evolution Mobile Studio TRIAL screenshot 22Audio Evolution Mobile Studio TRIAL screenshot 23Audio Evolution Mobile Studio TRIAL screenshot 24

Version History

Launched May 14, 2014 (over 5 years ago).

Releasing new versions every 18 days, on average.

Sep 24
2019
(Current)
Version Varies with device

* Using Cut on a MIDI clip could cause a crash. Solved.
* Fixes for IK MultiMedia iRig USB audio interfaces.

Apr 10
2019
Version 4.9.6

* Higher quality resampling algorithm which also preserves clip length
* Added 'Sample rate' option to Mix-down dialog.
* Reduced CPU usage on higher buffer size settings when using a USB audio interface. Should this new algorithm give you problems with USB audio playback or recording, disable 'Optimize CPU usage' in the app's settings and contact support.
* Added keyboard shortcuts for Arm and track selection (up/down).
* The track name is now displayed on empty lanes.

Mar 16
2019
Version 4.9.3

* Added a 'Music' folder icon to the 'Import audio/MIDI' browser to quickly jump to the Music folder on your device.
* Solved a crash that could happen on Android 9 after changing the base directory to /mnt/sdcard.

Mar 15
2019
Version 4.9.2

* Added a 'Music' folder icon to the 'Import audio/MIDI' browser to quickly jump to the Music folder on your device.
* Solved a crash that could happen on Android 9 after changing the base directory to /mnt/sdcard.

Feb 22
2019
Version 4.9.1

* Added MIDI remote control support: control the mixer, instrument ADSR controls and transport using a USB MIDI controller.
* 15 new soundfonts from Digital Sound Factory are added to the SoundFont shop, including the original sounds of the E-MU Proteus hardware modules!
* Added presets function to Toneboosters Compressor, DeEsser and Gate.
* Improved handling of multiple USB MIDI devices
* The instrument selection dialog now displays folders.
* and more..

Jan 13
2019
Version 4.8.7

* Added keyboard shortcuts SHIFT+1 to SHIFT+8 for function key commands for keyboards that lack function keys.
* An exception was thrown when showing the input dialog after creating a new audio track for non-English languages. Solved.

Dec 28
2018
Version 4.8.6

* Individual clips can now be renamed.
* When using a USB audio interface, the input dialog will be optionally displayed right after creating a new audio track.
* 'Virtual keyboard' can now be selected as input for USB MIDI tracks to drive outboard MIDI gear.
* Added 'P' and 'E' as alternative to the 'Space bar' key to solve issues with Dex.
* Added more keyboard shortcuts (F4 - F8), Ctrl-S for save.
* Solved black text issue in drop-down menus.

Dec 16
2018
Version 4.8.5

Fixed a long standing crash specifically on Android 7, where a long operation followed by a pop-up message could result in a crash

Dec 10
2018
Version 4.8.4

* Bus automation: when pressing Auto, the automation lanes for busses are now displayed as well and can be edited
* The automation lanes now show a horizontal dotted line for the default value of the selected parameter
* The time code area on top now shows tick marks for beats when zoomed in
* The piano roll editor now draws a center line for pitch bend and pitch bend events are now snapped to the center
* And much more..

Oct 13
2018
Version 4.8.2

* Added support for Android MIDI input on ChromeOS devices.
* Since the space bar does not work on ChromeOS, the 'S' key now functions as both play/pause and stop on ChromeOS.
* Range was not reset when loading a project which could cause a crash later on. Solved.

Sep 27
2018
Version 4.8.1

* Playback stopped working on ChromeOS 69 and higher. Solved.
* Fixed possible crash when trimming extremely small clips

Aug 28
2018
Version 4.8.0

* Added Attack, Decay, Release, Resonance, Cutoff and Fine tune parameters to the virtual keyboard dialog for custom sound shaping. The parameters can be automated as well.
* Markers are now saved in templates.

Aug 14
2018
Version 4.7.9

* Solved problems running on x86-based Android devices

Aug 13
2018
Version 4.7.8

* Enabling the arm button could play a short sound from an instrument track in some situations. Solved.
* Solved a crash when both an audio and MIDI track were armed and the count-in was active.
"* Could not preview an audio file on an SD card since 4.7.5. Solved.

Aug 02
2018
Version 4.7.7

* Solved issue with selecting files using the ES File Explorer option on recent Android versions

Jul 29
2018
Version 4.7.6

* Added option 'Set default velocity' to instrument pop-up menu in the drum pattern editor to set the velocity of individual drum hits. It will also ask to change the velocity of existing drum hits.
* Solved issue with sharing files on recent Android versions.

Jul 28
2018
Version 4.7.5

* Auto-save was only active after recording or adding a track. Solved.
* Undo/redo buttons were disabled in the piano roll editor. Solved.

Jul 19
2018
Version 4.7.4

* Solved issue with latency compensation (Vocal Tune etc.)
* Some phones would show only one row of drum pads. Solved.
* When playing back an armed audio track with software monitoring enabled, both the input and the audio on the track will now be heard
* When starting the app with both a USB audio and MIDI interface connected that had already been granted access before, one device would not be recognized. Solved.
* Solved issue with recording automation events that could cause a crash

Jul 17
2018
Version 4.7.3

* Added swing parameter to Quantize dialog.
* Double-tapping the project overview resets the zoom level to show the entire project.
* Added option 'Convert to instrument track' to track menu of drum pattern track.
* The drum pad velocity can now be changed.
* Added a Paste button to the piano roll editor which pastes at the time marker.
* Solved issue with metronome not playing correctly for signatures with 8 or more in the bottom part.

May 31
2018
Version 4.7.2

* Added automation recording. When the automation Read button in the mixer display is changed to Touch, all parameter movements (volume, panning, parameters of insert effects) are recorded during playback.
* Added 'Project notes' option to the Project menu where you can write down any text related to your project/song, like lyrics, ideas, etc.
* When the loop start marker was at the start, 'Set range to loop markers' did not work. Solved.
* Fixes in MIDI loop playback

Mar 14
2018
Version 4.7.1

* Detection of USB devices stopped working for x86-based Android devices. Solved.

Mar 07
2018
Version 4.7.0

* The output dialog of a USB MIDI track now contains a MIDI channel selection to modify the original MIDI channel of the events. This may be useful if your MIDI controller or keyboard can only send at MIDI channel 1.
* Muting and unmuting a virtual instrument track would revert to preset 0. Solved.

Mar 06
2018
Version 4.6.9

Solved issue with MIDI loop playback

Jan 01
2018
Version 4.6.8

* Split preference screen into subscreens and renamed it to Settings.
* Added option 'Snap vertical scrolling to track' to the Settings, which can be disabled for smooth vertical scrolling.
* The file extension of recordings did not match the recording file type. Solved.
* Solved issue with USB MIDI playback.
* Removed OGG as recording file type due to performance problems.
* OGG files will now be converted to WAV on import.

Dec 27
2017
Version 4.6.7

* Behavorial change: the marker menu now pops up by double-tap instead of long-tap.
* Solved issue with moving loop markers during playback.
* Solved issue with Google Drive cloud sync.
* Track name is now pre-selected when changing track name for faster renaming.
* Track colors were not always loaded correctly. Solved.

Nov 26
2017
Version 4.6.6

* Added 'Cloud sync' option to the Project menu supporting Google Drive. Backup your projects and recordings, share projects between Audio Evolution Mobile on multiple devices (Android and iOS) and share projects between friends. This functionality is unavailable in the demo version.
* Added Lo and Hi Cut parameters to Delay and Dual Delay
* Added a preference option to show a CPU and I/O usage meter
* When an audio clip is split, the new clip now gets the same clip volume as the original clip

Nov 15
2017
Version 4.6.5

* Recording with a USB MIDI keyboard could cause the clip to be deleted after recording, accompanied with an erroneous message that the clip was negative. Solved.
* After a sample rate change, the internal state of markers was incorrect. Solved.
* The time marker could jump to 0:00 in some situations. Solved.

Nov 13
2017
Version 4.6.4

Solved an issue with cross-fades

Nov 08
2017
Version 4.6.3

* Pressing Undo inside the piano roll editor could cause a crash. Solved.
* Fit MIDI events did not always work. Solved.

Oct 26
2017
Version 4.6.2

* Changed several effect parameters that control frequency to behave exponential
* Editing a MIDI clip could result in the first event in the clip not playing. Solved.
* The keys of the vocal tune were not saved correctly in a preset or project. Solved.
* When virtual keyboard velocity was turned on, the velocity for black keys was calculated incorrect. Solved.
* Mono samples could erroneously be pasted on stereo tracks and v.v. Solved.
* Much more, see the release notes in the app

Oct 25
2017
Version 4.6.0

Applying 'Fade in/out', Reverse or Pitch Shift on a trimmed clip would cause an exception and a clip with a negative or shortened length. Solved.

Sep 04
2017
Version 4.5.9

* Solved an issue where the app could crash during playback when clips with a negative length were present.
* After loading a project, the app now checks for clips with negative lengths and will remove them to prevent crashes later on.

Aug 24
2017
Version 4.5.8

* 4.5.8: Solved crash with Reverb
* Added count-in feature to the Tempo dialog.
* Added CPU booster option for use with USB audio interfaces, which may reduce audio glitching should you experience it. Note that this will consume more power and your device may get warm.
* When recording over an existing track, the applied latency correction would cause a gap after the recorded clip. Solved.
* Automation was not applied when playing in a loop. Solved.

Aug 23
2017
Version 4.5.7

* Added count-in feature to the Tempo dialog.
* Added CPU booster option for use with USB audio interfaces, which may reduce audio glitching should you experience it. Note that this will consume more power and your device may get warm.
* When recording over an existing track, the applied latency correction would cause a gap after the recorded clip. Solved.
* Automation was not applied when playing in a loop. Solved.

Jul 28
2017
Version 4.5.5

* Added 'Browse' button to 'Audio Evolution base directory' preference for Android 4.4 and higher.
* Solved possible crash when changing instruments.

Jul 20
2017
Version 4.5.4

Pressing stop after recording with a USB audio interface could potentially cause a crash in 4.5.3. Solved.

Jul 18
2017
Version 4.5.3

* 20 new soundfonts by Digital Sound Factory were added to the SoundFont shop, featuring many vintage synthesizers (ARP, JD800,Jupiter-8, JX8P, Rhodes, TB303, Wurlitzer etc.) and orchestral instruments including one free soundfont!
* The soundfont shop now also contains discount packs, saving around 30% compared to buying the individual soundfonts
* Improved French translation.
* Turning off the TB Ferox could cause noise. Solved.

Jul 05
2017
Version 4.5.2

* Added Toneboosters Ferox effect: add the warmth and punch of analog tape with the TB Ferox tape simulator plugin.
* Moving the volume faders and EQ sliders could cause zipper noise. Solved.
* Moving the volume, panning, EQ, fx send or MIDI velocity sliders slowly would pop up a menu which could be irritating. Double-tap now pops up the menu instead.

Jun 29
2017
Version 4.5.1

* Project templates: save project as a template and start a new project from a template
* Added preference option to ignore MIDI velocity from USB MIDI keyboards
* Added preference option to enable velocity for the virtual keyboard depending on where the key is touched
* The last used note length in the piano roll editor is now restored when starting the app
* The app stopped working for Android 2.3 devices in last version. Solved.
* and more..

Jun 24
2017
Version 4.5.0

* Added the option to load and save user presets for effects

Jun 21
2017
Version 4.4.9

* The drum pattern editor can now be zoomed.
* On the virtual keyboard screen, short tap on Sustain now toggles the sustain on/off. Long-tap will keep sustain for the duration of the tap.
* Added 'Video tutorials' item to 'More' menu.

May 27
2017
Version 4.4.8

Demo limits have changed:
* Projects can now be saved, but loading a project is limited to 3 tracks.
* Projects can now be mixed-down up to a maximum of 45 seconds.
* The app now has a trial period which can expire after a number of uses.
This will give you ample opportunity to try out the app before deciding whether the app is for you or not. For a fully functional app you will still need to purchase the full version from the Play Store.

May 25
2017
Version 4.4.7

* Improved range editing on the time line: a short tap now clears an existing range and a long-tap opens a pop-up menu to paste the range (next to the possibility of pressing the Paste button).
* Specific note off events are now sent on stop for USB MIDI tracks, which helps for MIDI devices which do not support the 'All notes off' event.
* Added 'Follow us on Facebook/Twitter' options to the More menu.
* When playback or recording failed to start, the project button could stay disabled. Solved.

Apr 27
2017
Version 4.4.6

Solved another issue with merging overlapping MIDI clips.

Apr 24
2017
Version 4.4.5

* Direct display of all note lengths in the left panel in the piano roll editor for quicker editing
* New grid size dialog in the piano roll editor for quicker editing
* New ‘Dynamic’ grid size for the piano roll which changes the grid size according to the grid lines of the current zoom level
* Changing the velocity slider now also affects the velocity of selected notes
* On the first audio recording, when only instrument tracks are present, the app will now also ask to run the latency detector

Apr 15
2017
Version 4.4.4

• When looping instrument tracks, a note off is now sent at the end of the loop.
• Added option to select a USB bus speed for Android 7+ devices since the bus speed cannot be automatically determined anymore which can lead to stuttering audio.
• Importing mp3's stopped working on devices with an Intel processor in 4.4.2. Solved.

Apr 12
2017
Version 4.4.3

• Added multi-selection to the 'Import audio/MIDI file' browser to be able to import multiple files at once.
• Increased compatibility with SoundFont SFZ files.
• Paste button is now enabled in Edit mode when applicable.
• Added Paste button to 'More' menu for phones.
• Events from drum pattern tracks can now be pasted onto other MIDI and virtual instrument tracks.
• USB audio/MIDI devices can now be attached with the app already running.

Apr 06
2017
Version 4.4.2

• Volume slider is now horizontal for phones, giving access to the arm, mute and solo buttons more easily. This can be changed in the preferences.

Feb 21
2017
Version 4.3.6

• Improved Vocal Tune algorithm.
• The retune speed was displayed reversely. Solved.
• Solved incorrect latency compensation for Vocal Tune.

Feb 20
2017
Version 4.3.5

• Solved MIDI timing issue accidentally introduced in 4.3.2

Feb 18
2017
Version 4.3.4

• Improved track-to-track synchronisation when the 'Standard Android audio' system is used on Android 5 or higher. Please run the latency detector again from the More menu to use the new algorithm.
• Zoom level is now stored with the project.
• Solved crash when loading a project with a sfz soundfont.
• Mix-down could crash when using an illegal character for files in the file name, like '/'. Solved.
• Solved issue with undoing a paste

Feb 09
2017
Version 4.3.3

• Added Mono option to the mix-down dialog
• Added 'Set punch in' and 'Set punch out' options to the markers menu
• Added 'Drum pads' to the MIDI input selection dialog to use drum pads for soundfonts from other vendors
• Added 'Remove' button to the top bar for effects with custom graphics
• Added MIDI channel filter option to the MIDI input selection dialog
• Paste using the paste button now pastes at the time marker
• Much more, see the release notes in the app!

Dec 02
2016
Version 4.3.1

• 7 new soundfonts added to the soundfont shop: Choir Ahhs, Choir Oohs, Mellotron, Orchestral Large Sections Strings, Orchestral Solo Strings, Steinway Grand Piano (over 200MB for 1 piano, multi-layer sampled at 24-bit!), and Taurus Bass Pedals. Check out the demo mp3's in the shop.
• The instrument selection dialog did not send a note off event when releasing the preset. Solved.
• The Soundfont shop dialog now shows prices in the users's currency.

Nov 18
2016
Version 4.3.0

• Mix-down to MP3 (in full version)
• Drum pattern track now behaves equally to other MIDI tracks: clips can be moved, trimmed, etc.
• Scroll in the drum pattern editor by swiping quickly.
• Splitting MIDI clips does not duplicate all events anymore but now makes a true split.
• The drum pattern and piano roll editors now show a light red background on areas outside of the clip.
• The stems (export to other DAW) dialog now has an option to append the track name instead of the track number.

Oct 29
2016
Version 4.2.9

• Pressing play with the time marker between loop markers now doesn't reset the time marker anymore to the loop start.
• Fixed bug when importing MIDI files.

Oct 14
2016
Version 4.2.8

• 4 new large sample loop packs (up to 179MB!) from Function Loops added to the Loop Shop: Deep House, Future Bass, Groove EDM and Poolside House.
• The 'Audio Evolution base directory' selection screen now has a 'Browse' option for devices running Android 4.4 or higher that do not expose external sd cards correctly.
• Added 'Reset loop markers' to timecode pop-up menu which resets the loop markers to the current viewing area.
• Duplicate track' did not copy the insert effect parameters. Solved.

Sep 21
2016
Version 4.2.7

• Added 'Duplicate track' option to Track menu to copy an entire track including all effects, automation etc.
• Clip volume handles now only show when the clip has a certain height.
• Selecting 'Lock Marker' would cause the app to exit. Solved.

Sep 16
2016
Version 4.2.6

• Automation was not taken into account anymore when doing mix-down. Solved.

Sep 14
2016
Version 4.2.5

• Individual audio clips now have their own volume and fade-in and out points. They can be set by dragging the white boxes inside the clip in Edit mode.
• Solo-ing multiple busses did not work correctly. Solved.

Aug 28
2016
Version 4.2.3

• The Novation Impulse MIDI keyboards now work and possibly some others that didn't work before.
• The USB audio/MIDI driver now supports Android 7 Nougat.
• Exiting the app when a USB MIDI track was armed could freeze the app. Solved.

Jun 17
2016
Version 4.2.2

• USB feedback transfers were accidentally disabled since version 4.1.2 which may have caused audio glitching at playback for certain USB audio interfaces. Solved.

Jun 14
2016
Version 4.2.1

Apr 19
2016
Version 4.2.0

Mar 25
2016
Version 4.1.6

Feb 29
2016
Version 4.1.5

Feb 16
2016
Version 4.1.4

Jan 20
2016
Version 4.1.3

Dec 18
2015
Version 4.1.2

Dec 09
2015
Version 4.1.1

Nov 27
2015
Version 4.1.0

Nov 11
2015
Version 4.0.9

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Nov 08
2015
Version 4.0.8

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Oct 22
2015
Version 4.0.7

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Oct 16
2015
Version 4.0.6

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Oct 14
2015
Version 4.0.5

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Oct 09
2015
Version 4.0.4

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Oct 07
2015
Version 4.0.0

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer
• Soundfont packs


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Drum pattern editor
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jul 31
2015
Version 3.7.6

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: http://www.extreamsd.com/forum
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jul 17
2015
Version 3.7.5

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Punch in/out
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jun 23
2015
Version 3.7.3

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jun 10
2015
Version 3.7.2

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering (mixdown) to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jun 05
2015
Version 3.7.1

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable multi track music studio that will replace your 4 track recorder or tape machine, almost for free!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

May 22
2015
Version 3.7.0

The most powerful multitrack audio/MIDI recording studio on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

May 16
2015
Version 3.6.9

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


If you are looking for something similar to Cubase or Cubasis, this is it!


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

May 05
2015
Version 3.6.8

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Apr 16
2015
Version 3.6.6

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Apr 09
2015
Version 3.6.5

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Mar 30
2015
Version 3.6.4

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Mar 23
2015
Version 3.6.3

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Mar 06
2015
Version 3.6.1

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Feb 12
2015
Version 3.6.0

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Feb 05
2015
Version 3.5.8

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Feb 04
2015
Version 3.5.7

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jan 22
2015
Version 3.5.6

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!

Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Jan 15
2015
Version 3.5.5

"Audio Evolution Mobile is by far the best recording app we've seen for the Android platform" - Computer Shopper Jan 2014

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!


Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Dec 23
2014
Version 3.5.4

"Audio Evolution Mobile is by far the best recording app we've seen for the Android platform" - Computer Shopper Jan 2014

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!


Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Volume/pan/mute automation
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Dec 09
2014
Version 3.5.3

"Audio Evolution Mobile is by far the best recording app we've seen for the Android platform" - Computer Shopper Jan 2014

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!


Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Volume/pan/mute automation
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Dec 04
2014
Version 3.5.2

"Audio Evolution Mobile is by far the best recording app we've seen for the Android platform" - Computer Shopper Jan 2014

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!


Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Volume/pan/mute automation
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Dec 03
2014
Version 3.5.1

"Audio Evolution Mobile is by far the best recording app we've seen for the Android platform" - Computer Shopper Jan 2014

The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!


Note that this is a TRIAL version of the full paid version and of course does not include saving of projects!


(*) The following in-app purchases are available in the full version to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer


Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Volume/pan/mute automation
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching while maintaining pitch
• Unlimited undo/redo for editing facilities
• Grid options for aligning your samples (with tempo and time signature)
• Repeat samples with several options to create loops
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!


(*) Depending on your hardware's capabilities


Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher


Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.


If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!


Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack


Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start


To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.

Click to see more