Various updates and fixes.

Various updates and fixes.

Various updates and fixes.

Various fixes

Various fixes

More support for 2018+ vehicles. Proxy management tools: backup, restore, custom proxy write, proxy length extension. Search feature for the car configuration options. Various fixes.

Urgent fixes

Urgent fixes

Improvements for the OBD interface auto-detection. ELS27 interface support. Alfa Romeo Giulia IPC support. Various fixes.

Various fixes. Test for Security Gateway (SGW).

Support for body computers of Jeep JL/JT, Maserati Ghibli/Levante/Quattroporte 2018+. Update for HVAC RAM DT 2019+. Various fixes.

Support for BCM and RFH of 2018+. Support for Alfa Romeo Giulia engines. Bug fixes.

Bug fixes release.

Fixes for the latest Android OS and log upload to Google Drive.

Bug fixing release

More support for Chrysler Pacifica (RU) including the hybrid control modules. Bug fixes.

Translation fix

More support for non-PowerNet control modules on Chrysler/Dodge/Ram/Jeep vehicles

Bug fixing release.

Bug fixing release.

More support for the before-the-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

Bug fixing release.

Bug fixing release.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for the before-PowerNet Chrysler/Dodge/RAM/Jeep cars, various fixes.

More support for transmission modules on different vehicles of MY2006-2017, various fixes.

More support for transmission modules on different vehicles of MY2006-2017, various fixes.

Updates for more control units support, various fixes.

More PowerNet control units support, complete support of Fiat 500E, more support of diesel engines on Chrysler/Dodge/Jeep vehicles

More PowerNet control units support, complete support of Fiat 500E, more support of diesel engines on Chrysler/Dodge/Jeep vehicles

Fix for Proxy alignment, more control units support.

Updates for more control units support, various fixes.

Full support of Jeep Compass MP, various fixes.

Fix for connection to BT interface. More support for Jeep Compass (MP).

Updates for more control units support, various fixes

Updates for more control units support, various fixes

Updates for more control units support, various fixes

Updated to full support of Chrysler 200 (UF) and Jeep Cherokee (KL), more support for different Fiat/Chrysler/Dodge/Jeep/RAM cars.

Update for Fiat Tipo/Egea, Dodge Neon. Basic support for most of Dodge/Chrysler/Jeep/RAM cars produced since 2006.

Update for diesel engines on RAM Pro Master, JEEP Compass/Patriot (MK), Grand Cherokee.Experimental support of new Jeep Compass 2017.

Full support of Fiat 500X and Jeep Renegade.

Support for Fiat TIPO/EGEA 2015, Dodge NEON 2016.
Various fixes.

Support for Fiat TIPO/EGEA 2015, Dodge NEON 2016.
Various fixes.

Jeep Cherokee (KL) support.
Support for Kiwi 3 Bluetooth LE interface.
Various fixes.

AlfaOBD software for diagnostics of Alfa-Romeo, Fiat, Lancia cars. Dodge Dart, RAM Pro Master/Pro Master City, Chrysler Delta, Ypsilon, Peugeot Boxer, Citroen Jumper models produced in cooperation with Fiat are also covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat, Lancia. Some Dodge, RAM, and Chrysler models produced in cooperation with Fiat are covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".

AlfaOBD software for Alfa-Romeo, Fiat and Lancia diagnostics. Although it is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.

Application requires activation. After installation open the "About" screen and send activation request to info@alfaobd.com. You will receive activation code, paste it to the corresponding field on the "About" screen and activate the program.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming

For the full list of supported control units visit http://www.alfaobd.com

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via Setting.

NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".