About Icon


NOTE: When updating or running for the first time: if you cannot detect or connect to your receiver, try unplugging the receiver and plug it back in to reset the network card. This resolves practically all communication issues.

Fully control the features of your network-enabled Onkyo/Integra receiver - from anywhere in your house with an iPhone/iPod/iPad. You no longer need to be in front of the TV to enjoy your receiver.

Main Features:
• Display of media info on screen - no need to turn on the TV!
• Controls playback of USB sources, iRadio, DLNA and Windows Media shared media
• Supports UP-A1 iPod Dock, UP-HT1 HD Radio Tuner, UP-DT1 DAB+ Tuner, DS-A3 iPod dock
• Customize labels for sources, presets and listening modes
• Control more than one receiver at a time
• Easy configuration and setup - auto-detect and auto-setup
• Zone Controls for all supported zones, including power, volume, and source selection
• Enable/Disable unused sources and listening modes
• Direct tuning using built-in tuner
• Display of audio and video source and output information - HDMI, Bitrate,
• Supports several models of Ethernet to RS-232 converters
• AirPlay capability with an attached AirPlay compatible device.

Note: AirPlay requires an AirPlay-capable device (Apple TV, Airport Express, Boxee, etc.). This works on any model AVR compatible with oRemote

Compatibility list (please check carefully):

These Onkyo/Integra models fully support all functions:

2014 Onkyo/Integra Receivers:
HT-R593, HT-R693, TX-NR535, TX-NR636, TX-NR737, TX-NR838, HT-RC660, HT-R693, TX-NR1030, TX-NR3030, PR-SC5530 Integra DTR-30.6, DTR-40.6, DTR-50.6, DTR-60.6, DTR-70.6, DHC-80.6

2013 Onkyo/Integra Receivers:
TX-NR525, TX-NR626, TX-NR727, TX-NR828, TX-NR929, HT-RC550, HT-RC560. Integra DTR-30.5, DTR-40.5, DTR-50.5, DTR-60.5, DHC-60.5

2012 Onkyo/Integra receivers:
TX-NT414, TX-NR515, TX-NR616, TX-NR717, TX-NR818, TX-NR1010, TX-NR3010, TX-NR5010, RC460, HT-RC470, DTR-20.4, DTR-30.4, DTR-50.4, DTR-70.4, DTM-40.4


These work best with latest Onkyo firmware (no NET menu in Zones):

2011 Onkyo/Integra receivers:
HT-R690 (HT-S7400, HT-S8400) , HT-R990 (HT-S9400THX), HT-RC360
HT-RC370, TX-8050, TX-NA509, TX-NA609, TX-NA-609X, TX-NA1009, TX-NA3009, TX-NA5009, TX-NR509, TX-NR579,TX-NR609, TX-NR709, TX-NR809, TX-NR1009, TX-NR3009, TX-NR5009, PR-SC5509
DTR-20.3, DTR-30.3, DTR-40.3, DTR-50.3, DTR-70.3, DHC-80.3, DTR-80.3

HT-RC270, TX-NR708, TX-NR808, TX-NR1008, TX-NR3008, TX-NR5008, PR-SC5508
DTR 40.2, DHC 40.2, DTR 50.2, DHC 50.2, DTR 70.2, DHC 70.2, DTR 80.2, DHC 80.2

The following models do not support search capability, album art, or on-screen menus:

HT-RC180, TX-NR807, TX-NR1007, TX-NR3007, TX-NR5007, PR-SC5507
DTR-30.2, DTR-40.1, DHC-40.1, DTR-50.1, DTR-70.1, DTR-80.1, DHC-80.1

The following models support only volume, source, listening mode and Zone control:

TX-NA905, TX-NR905, PR-SC885, TX-NA906, TX-NA906X, TX-NR906, PR-SC886
DTC-7, DTX-7, DTR-7.8, DTX-7.8, DTR-8.8, DTX-8.8, DTC-9.8, DTR-4.9, DTR-5.9, DTX-5.9, DTR-6.9, DTR-7.9, DTR-8.9, DTX-8.9, DTR-9.9, DTX-9.9, DTR-20.1

Support is now included for Onkyo and Integra AVRs that only have a serial port on the back. See the support link for more info on this device and where to purchase one.

**If you have any pre-purchase questions regarding product compatibility, please contact me through the support link or via Facebook. I personally answer all emails that arrive. The same goes for any support issues. Thank you.**

FACEBOOK: http://www.facebook.com/oRemote

iOS Store Category:

Primary: Entertainment

Secondary: Utilities

App Store

Total Ratings



oRemote screenshot 1oRemote screenshot 2oRemote screenshot 3oRemote screenshot 4oRemote screenshot 5

Version History

Launched Nov 23, 2010 (about 10 years ago).

Releasing new versions every 3 months, on average.

Jan 10
Version 1.5.5

Fixed crashing issue when Harmony Hub is present on network.
URI schemes working again on iPad

Jan 06
Version 1.5.4

Added support for 2015 and 2016 model receivers:
TX-NR545, TX-NR646, TX-NR747, TX-RZ800, TX-RZ900, TX-NR555, TX-NR656, TX-NR757, TX-RZ610, TX-RZ710, TX-RZ810, TX-RZ1100, TX-RZ3100, PR-RZ5100, TX8140, TX-8160

Integra models:
DTR-20.7, DTR-30.7, DTR-40.7, DTR-50.7, DTR-60.7, DHC-60.7, DRX-2, DRX-3, DRX-4, DRX-5, DRX-7, DRX-R1, DRC-R1

-Supports Airplay streaming on 2015 and 2016 models, plus streaming to a connected AirPlay device on previous models.
-Better Zone controls
-Better use of sliding menus (larger, less clunky)
-UI updated for iOS 9.3 to iOS 10
-Improved UPNP detection
-Silver and black UI themes

Jun 23
Version 1.5.1

Added support for:
HT-R593, HT-R693, TX-NR1030, TX-NR3030, PR-SC5530, DTR-60.6, DTR-70.6, DHC-80.6

Fixed issues with:
Search function crashing app on Spotify
Airplay controls
AV Toolbar on receivers that support Speaker A/B and/or Triggers
Titles not showing up on some buttons for TX-NR616
Speaker volume levels not appearing for surround speakers on TX-NR1010
Non-Onkyo devices sometimes tripping the auto detection
Some cleanup on Setup tab to make it less "wordy"

Jun 05
Version 1.5.0

2014 Onkyo/Integra support: TX-NR535, TX-NR636, TX-NR737, TX-NR838, HT-RC660, HT-R693 and Integra 30.6, 40.6 and 50.6.
Updated user interface to iOS 7/iOS 8 style
Added: AV Sync controls, HDMI CEC Enable/Disable, AccuEQ support
Bug fixes:
Fixed slider control not appearing on iOS 8.3
Various usability issues addressed

Aug 31
Version 1.4.9

Added support for the following 2013 models:
Onkyo TX-NR727, TX-NR828, TX-NR929. Integra DTR-30.5, DTR-40.5, DTR-50.5, DTR-60.5, DHC-60.5

Problem selecting AVR region
Volume control on TX-NR727
Crashing bug when resuming app and AVR is no longer on the same IP address.
iOS compatibility issues.

Jul 14
Version 1.4.8


Removed Testflight library that was causing some startup crashes.

Fixed MAC address parser that was causing the *other* startup crashes when using UDP. Sorry.

Added Extra 1,2,3 inputs to the iPhone/iPad for receivers that require them. Fixed Audyssey EQ selection in the AV tab.

Jul 04
Version 1.4.7

Bug fixes - mainly with volume control and Zones. Some crashing bugs fixed.

New models supported: TX-NR525, TX-NR626, TX=NR727, TX-NR828, HT-RC550, HT-RC560, HT-RC460, HT-RC470. Preliminary support for the CR-N755, with CD and network controls supported.

Mar 27
Version 1.4.6

Update to fix TestFlight library that was causing startup crashes for some users.

App should recognize HT-RC460 now.

Jan 25
Version 1.4.5

Fixed issue with "UP" command on BD player control
Fixed feedback email message to again include system/receiver info
Re-enabled crash logger

Jan 17
Version 1.4.4

Fixed error preventing DVD/BD control on the iPad in the RI Tab

Jan 10
Version 1.4.3

Network fixes addressing some of the bugs found in 1.4.2:

• Changes that should help considerably with auto-detection
• Corrected issue where the app would have trouble making a connection after a long sleep.

GUI fixes:
• RI Tabs have better controls for HDMI-CEC devices and also allow for control of RIHD/HDMI-CEC DVD players, BD players and TVs (depending on Onkyo support for these devices).
• Better Zone behavior
• App is more tuned to utilize the iPhone 5's added screen real-estate
• Corrections to several configuration files for certain Onkyo receivers that were using the wrong volume commands.

New features:

• Support to control Oppo BD players via IP control or serial control.
• Support to control Boxee Box.
• Added TEAC AG-D500 to the compatibility list.

Nov 05
Version 1.4.2

Bug fixes for 1.4.1:

Autodetect fix. People who upgraded from 1.3.X to 1.4.1 may have had problems with autodetect. This should fix it. If not, a delete and reinstall of the app will take care of the issue.

Menus controls are back on some 2011 models, like the 609 and 8050. It turns out not all 2011 models (even the same model numbers) follow the protocol the same way.

Volume control fix for the TX-NR906

iPod menu controls pop up for menu operations and playback controls appear for playback.

Oct 23
Version 1.4.1

**Please read the next three things before upgrading**

1. If you are upgrading from an earlier version and have device detection problems, visit here (or follow the support link below):


2. Some 2011 models may not display NET menus in this version, I'll have a fix for it out very soon.

3. This release is for iOS 4.3 and later only

iOS 6 compatibility:
Retina-enabled for iPad and iPhone
iPhone 5 compatibility

Better Auto-detect
Manual connection settings for up to 10 receivers
NET menus in Zones for 2012 model receivers
AV Sync settings for 2012 model receivers
Pop-up menus for most all functions instead of toggles
Can change friendly name and set Max volume on AVR
Zones can be renamed
Better layout for accessibility features
Dedicated OSD controls for iPhone
Better setup menu support for different models Q.Setup, Home, etc.
Better album art net menu refreshing

Sep 19
Version 1.3.11

Minor compatibility updates

May 25
Version 1.3.10

Zone 3 and Zone 4 fix for twitchy power on button
GUI enhancements

May 15
Version 1.3.9

Support for 2012 models. A bug in 1.3.8 prevented selection of network sources. My apologies.

Support for TX-NR414,515,616,717,818,1010,3010,5010.
Better Spotify display

NET Display
Zone 3&4 power

May 09
Version 1.3.8

Various fixes:
Autodetect works better, can now detect and control up to 7 AVRs (iPhone) and 15 (iPad).

Support for 2012 models will be in 1.3.9, a bug prevents operation of network sources with 1.3.8. Sorry.

Apr 07
Version 1.3.7

Fixes for reported bugs in 1.3.6.
Re-added Advanced BD controls for the one device it seems to work for: Sony BDP-S270
Speaker distance settings are read-only in this version until I find out how to re-enable the sound output.
2012 model support (TX-NR414,515,616,etc.) coming soon!

Mar 22
Version 1.3.6

Detection problems should be solved for 2010 and 2011 AVR's with new method using Onkyo's proprietary detection protocol. uPnP is also there for those who need it.

Major GUI optimizations: iPhone and iPad versions now are more similar in layout.
Redundant tabs removed.
More functions available on iPad for Universal Port devices
Zone controls have even more capabilities
RIHD control for compatible TV sets for 2011 model AVRs.
Many reported bugs fixed.
Access to many of the items in the AVR setup menu
More 2011 models supported.
2012 Model support will be coming in a few weeks.

Nov 17
Version 1.3.5

Added capability to launch other apps via URIs
Fixed crash issue with older Onkyo AVRs with built-in HD Tuners
Fixed screen update issue where stale data remains after switching from NET or DLNA sources
Various GUI optimizations

Oct 12
Version 1.3.4

Fixed initialization of listening modes.

Oct 11
Version 1.3.3

Added fixes to work better with the recent firmware update and protocol changes on 2010 models.
2010 models now support UTF-8
2010 models now support DLNA search
(You must update to the latest Onkyo firmware for these features).
Zone 2-4 tuner update fix

Oct 11
Version 1.3.2

Fixes reported problem with input selections in Zone 2.
Fixes input selections for default settings on some 2011 models when electing "default",

Oct 05
Version 1.3.1

Multiple AVR control! Now you can control more than one receiver (up to 6) with oRemote
GUI enhancements to pretty up toolbar from older versions
Customization of Sources (add/delete/edit)
Customization of Net Presets (add/delete/edit)
Customization of Listening Modes (add/delete/edit)

Fix for occasional dropped DLNA menu items

Sep 22
Version 1.3.0

Now uses cocoaasyncsockets for networking, should be more reliable.
Improved startup & self-configuration
Improvements to the net radio presets
GUI improvements and fixes
Removed Onkyo popup messages
Improved UTF-8 support

Sep 02
Version 1.2.17

UTF-8 support in 2011 models working, net menu display oddness fixed
Power status now updates better with new messaging scheme
Sliders (for speaker levels) also update better
PR-SC5508 was somehow omitted from the lookup table for listening modes

Aug 25
Version 1.2.16

Contains fix for listening mode refresh bug on pre-2011 models. LM now updates on the display of the app.

Click to see more